Table of Contents
Advertisement
4-4 Optimizing Printing to Match Media Thickness
Description
The movement transfer of media experiences subtle changes due to the thickness of the media. When the movement
distance becomes discrepant, horizontal stripes are more likely to occur during printing. We recommend performing
correction to match the media you're using. Repeat the process of printing a test pattern and entering a correction
value a number of times to find the optimize value.
Printing this test pattern using parameters identical to those for actual printing. Also, using material such as media
scraps that have passed through the printer may not yield correct results.
Note, however, that you can also make this setting on the computer (by, for example, choosing the media type in the
RIP program you are using). Use this feature when you want to make the setting on the printer, without changing any
settings on the computer. When you have made the setting on the computer, the computer's setting is used and the
printer's setting is ignored.
Default Setting
[CALIBRATION]: 0.00%
Chapter 4 Feature Reference
79
Hide quick links:
Advertisement
Table of Contents
