Omron CPM2C Operation Manual page 85

IBM PC/AT or
compatible
computer
Connecting Cable
XW2Z-200S-V (2 m)
XW2Z-500S-V (5 m)
Note
Peripheral Port Connection
A personal computer can be connected to the CPU Unit's Peripheral port
through a CQM1-CIF01 or CPM1-CIF01 RS-232C Adapter. The XW2Z-
Cables have a D-sub 25-pin connector and the XW2Z-
D-sub 9-pin connector.
CQM1-CIF02 (3.3 m)
CPM1-CIF01
1. The CS1W-CN226/626 Connecting Cables can be used, but the CS1W-
CN225/625 and CS1W-CN227/627 Connecting Cables cannot be used.
2. The CQM1-CIF11 Connecting Cable cannot be used. (If one is connected,
the CPM2C will not recognize it; the PC will enter RUN mode at startup if the
PC Setup (DM 6600) is set so that the Programming Console's mode switch
controls the startup mode.)
3. Refer to Section 4 Using Programming Devices for details on the Support
Software that can be used with the CPM2C.
Peripheral port
CPM2C-CN111 (0.1 m)
CS1W-CN114 (0.05 m)
Section 3-4

00S

00S-V Cables have a
CPM2C CPU Unit