Omron CPM2C Operation Manual page 114

• Writing a Word Address
11. Input the second operand.
B A
LR 1
Press the WRITE Key to write the instruction to Program Memory. The next
program address will be displayed.
WRITE
Note It isn't necessary to press the Shift + CONT/# Keys or Shift + CH/#
when inputting an IR area bit or word address.
12. Input the next instruction.
F A
5
FUN
Press the WRITE Key to write the instruction to Program Memory.
WRITE
• Writing an Unsigned Decimal Number
13. The first operand is input as an unsigned integer.
CONT
SHIFT TR
#
Input the value of the operand from 0 to 65535.
C F
2 5
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
15. The second operand is input as a signed integer.
CONT
SHIFT
#
Input the value of the operand from --32,768 to 32,767. Use the SET Key to
input a positive number, and use the RESET Key to input a negative number.
B A
1
RESET
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
16. Restore the hexadecimal display.
SHIFT
WRITE
  ( 

0
 
 % &

 % ) &
0
   
   
NOT
   
6
   
TR
  
  
'+
TR
  
', 
0
  
TR
   
Section 4-4

'
' )*
' 
' *