Omron CPM2C Operation Manual page 68

Connector Specifications (Fujitsu)
Item
Soldered jack
Crimp Crimp jack housing
connector
Crimp contacts
Hand crimp tool
Contact removal tool
Pressure Pressure jack with closed j
connector end cover d
Pressure jack with open end j
cover
Pressing g
tools l
Connector cover
(Not compatible with the closed-end cover (N ibl i h h l
pressure jack.)
Connecting I/O Connectors
(Pressure Connectors)
1, 2, 3...
24-pin gold-plated terminals
24-pin
For wire gauges 24 AWG to 28 AWG
---
---
24-pin gold-plated terminals
24-pin silver-plated terminals
24-pin gold-plated terminals
24-pin silver-plated terminals
Hand press General purpose
Cable cutter General purpose
Locator plate For the 360-series connectors
Thin slanted cover for 24-pin connector
d d
With slotted screws for 24-pin connector
(Can be turned by hand.)
With Phillips-head screws for 24-pin connector
With intermediate Phillips-head screws for 24-pin
connector
Use the following procedure when connecting a pressure connector.
1. Align the connector and insert it into the Unit.
2. Use a flat-blade screwdriver to tighten the connector's fastening screws.
Specifications
Flat-blade screwdriver
Section 3-4
Model number
FCN-361J024-AU
FCN-363J024
FCN-363J-AU
FCN-363T-T005/H
FCN-360T-T001/H
FCN-367J024-AU/F
FCN-367J024-AG/F
FCN-367J024-AU/H
FCN-367J024-AG/H
FCN-707T-T101/H
FCN-707T-T001/H
FCN-367T-T012/H
FCN-360C024-J2
FCN-360C024E
FCN-360C024B
FCN-360C024C