Home2 Screen; Panel Lock - FUTABA 32MZ Instruction Manual

Home2 screen

If [Home2] is pushed, it will become the display to which the timer and the telemetry data were expanded.
Timer
If one of two timer
displays is pushed,
you will enter the
Timer screen of a
Linkage menu.

Panel lock

Temporarily activating this function makes it impossible to change data by mistakenly touching keys
during light.
Please perform a touch-panel lock for safety. Touch screen in [System Menu] → [Display] other than
the following has an automatic setup.
Start-up lock: It becomes a panel lock at the time of the power supply ON.
Automatic lock: It synchronizes with Backlight decrease time and becomes a panel lock.
HOME/EXIT
Lock by simultaneous pressing
HOME/EXIT
Unlock by simultaneous pressing
DANGER
The T32MZ touch screen is very sensitive. To avoid accidentally activating it during a light, it is suggested that it
be locked. Due to the touch screen's sensitivity, allowing it to be touched during light by a neck strap hook, servo
extension, or even your hand could be dangerous. Please use the touch panel lock for added safety during light.
44
＜ Basic Operation ＞
● Return to home screen
●Three telemetry data screens can be displayed.
If three either is pushed, it will move to a telemetry screen.
Three displays can be changed on a telemetry screen.
U.MENU/MON.
U.MENU/MON.
●If the touch panel is touched
while locked, this display appears
and touch panel operation can not
be performed.