S.bus Installation - FUTABA 32MZ Instruction Manual

Digital professional radio control system

Hide thumbs Also See for 32MZ:

Table of Contents

S.BUS Installation

This set uses the S.BUS system. The wiring is as simpliied and clean mounting as possible, even with

models that use a large number of servos. In addition, the wings can be quickly installed to the fuselage

without any erroneous wiring by the use of only one simple wire, even when there are a large number of

servos used.

●When using S.BUS, special settings and mixes in your transmitter may be unnecessary.

●The S.BUS servos and S.BUS gyros memorize the number of channels themselves. (Settable with the

T32MZ)

●The S.BUS system and conventional system (receiver conventional CH used) can be mixed.

S.BUS　Glider usage example

S.BUS Aerobatic plane usage example

HUB ( Optional )

i-Connector ( Optional )

Receiver: R7108SB

Servo: S3173SVi×9(Optional )

Throttle servo: BLS173SV ( Optional )

Battery: FR2F1800 ( Optional )

Receiver: R7108SB

Aileron servo: BLS174SV×2 ( Optional )

HUB×3 ( Optional )

Rudder Servo: BLS175SV×1 ( Optional )

Elevator servo: BLS173SV×2 ( Optional )

＜ Before Use ＞

Table of Contents