Before Use; Features - FUTABA 32MZ Instruction Manual

BEFORE USE

FEATURES

FASSTest system
The T32MZ transmitter adopted the bidirectional communication system "FASSTest" . Data from the
receiver can be checked in your transmitter. FASSTest is a maximum 18 channels (linear 16 channels +
switch 2 channels) 2.4 GHz dedicated system.
Channel expansion (multiprop function)
The multiprop function can be used by using the separately sold multiprop decoder MPDX-1. The
multiprop function is a function that divides one channel into eight channels and extends the number of
channels. Up to 2 MPDX-1s can be used, and up to 32 channels can be expanded as follows.
・ Linear channel 14 channels (2 channels are used by multi-prop function)
・ ON/OFF channel 2 channels
・ Multiprop channels 16 channels
Multiprop channels have the following differences from normal linear channels.
• The resolution of the multiprop channel is lower than that of the linear channel.
• Operating multiple multiprop channels simultaneously may reduce the operation response of the
multiprop channel.
• Multiprop channels can not use the mixing function.
S.BUS2 system
By using the S.BUS2 system multiple servos, gyros and telemetry sensors are easily installed with a
minimum amount of cables.
Windows Embedded Compact 7
T32MZ utilizes the world famous Microsoft Windows Embedded Compact 7, which offers outstanding
dependability and valuable resources.
Color LCD Main display
T32MZ has a HVGA (640x240 pixels) full color backlight LCD touchscreen. The screen is manufactured
of a translective construction which enables both indoor and outdoor visibility.
Color LCD Sub display
T32MZ has a color LCD sub-display. It will be possible to know telemetry information separately from the
main display. The sub display uses a relective LCD with good visibility even outdoors.
10
＜ Before Use ＞