The Example For Choosing System Type - FUTABA 32MZ Instruction Manual

Digital professional radio control system
Hide thumbs Also See for 32MZ:
Table of Contents

Advertisement

The example for choosing System Type

-Want to use more channels
-Want to use a large number
of telemetry functions
FASSTest 12CH
FASSTest 18CH
R7003SB
R7006SB
R7008SB
R7014SB
R7018SB
R7108SB
CGY760R
System type
■ FASSTest 18CH ---
■ FASSTest 12CH ---
Analog servos cannot be used with the R7108SB in the FASSTest 12CH mode.
■ FASST MULTI
■ FASST 7CH
■ T-FHSS Air
■ S-FHSS
Receiver link method in FASST and S-FHSS
If the receiver of FASST and S-FHSS is used, the
methods of a link differ.
1. Bring the transmitter and the receiver close to
each other, within 20 inches (half meter).
2. Turn on the transmitter.
3. Turn on the receiver.
4. Press and hold the Link switch more than two
(2) seconds. When the link is complete, the LED
in the receiver changes to solid green. When
the ID cannot be read due to the surrounding
environment, try reading it with the transmitter and
receiver antennas touched.
*Follow the manual of the receiver to be used.
Moreover, carry out an operating check.
-Response speed has
-Want to use a
priority over number
previously used
of channels
receiver as is
-Telemetry requires
only the current
receiver battery
FASST MULT
R608FS
R6008HS
R7003SB
R6108SB
R6208SB
R7006SB
R6014HS
R7008SB
R7014SB
R6014FS
R6203SB
R7018SB
R6203SBE
R7108SB
R6202SBW
CGY760R
R6303SB
R6303SBE
R7006SB
R7014SB
R7018SB
R7108SB
FASSTest system receiver mode. Applicable with the telemetry sensor unit. Up to 18
channels (linear 16+ON/OFF2) can be used.
FASSTest system receiver mode. Applicable with receiver voltage display. Up to 12
channels (linear10+ON/OFF2) can be used. Telemetry Sensor cannot be used, but the
response speed is faster than that of the 18CH mode.
---
FASST-MULTI system receiver mode. Up to 18 channels (linear 16+ON/OFF2) can be
used.
--- FASST-7CH system receiver mode. Up to 7 channels can be used.
---
T-FHSS system receiver mode. Applicable with the telemetry sensor unit. Up to 18
channels (linear 16+ON/OFF2) can be used.
--- S-FHSS system receiver mode. Up to 8 channels can be used.
-Want to use an
-Want to use a
T-FHSS system
miniature receiver
receiver
for indoor planes
-Want to use a large
number of telemetry
functions
FASST 7CH
T-FHSS Air
R617FS
R6004FF
R3001SB
R616FFM
R3004SB
R6106HF
R3006SB
R6106HFC
R3008SB
R6203SB
CGY760R
R6202SBW
R6203SBE
-Telemetry is
R6303SB
not used
R6303SBE
T-FHSS Air-mono
R7006SB
R7108SB
R3106GF
R3206SBM
In case of
FASST/S-FHSS, a Link
button of the receiver is
pressed for a link.
< Linkage Menu >
-Want to use an
S-FHSS system
miniature receiver
S-FHSS
R2006GS
R2106GF
R2001SB
R2008SB
R2000SBM
(Usable receivers)
(The time of april, 2019)
85

Advertisement

Table of Contents
loading

Table of Contents