Home Screen - FUTABA T16IZ Short Manual

Home Screen

This is the Home screen and descriptions of its menus. Use your finger to operate the touch screen.
Battery voltage for receivers
• In FASSTest/T-FHSS mode, it is
displayed. Receiver voltage
and Ext voltage display
The reception of the signal from the
receiver to the transmitter is shown.
• This does not affect flight.
Timer1, Timer2
• Timer is displayed here.
Tap the time button to start/stop the
timer. (When the screen is tapped for
1 second, timer is reset to the initial
value.)
→ (Menu)
• System
• Linkage
• Model select
Tap the button to call each Menu
screen.
System timer
• This shows the accumulated time
since the latest reset. (Each model /
Total)
(Hour):(Minute):(Second)
WARNING
Be sure to confirm the model name before flying your aircraft.
Check the battery voltage as often as possible and try to charge the battery earlier.
If the battery alarm makes a sound, land your aircraft immediately.
*You can adjust the LCD contrast by the display setting in the system menu.
26
Condition name
• The condition name
that is currently used
is displayed here.
User's name
Battery Indicator
• When the low battery, the
alarm will beep. Land your
aircraft immediately.
→ (Menu)
• Model
Tap the button to call Model
Menu screen.
System mode
• System(FASSTest18CH etc.)
mode is displayed here.
RF Indicator
Model Name
• The model name that
is currently used is
displayed here.
Digital trim (T1 to T4)
• Trim position is displayed
here.