Cleaning The Engine-Cooling Fins And Shrouds; Checking And Cleaning The Hydraulic-Unit Shrouds - Toro 72907 Operator's Manual

Cleaning the
Engine-Cooling Fins and
Shrouds
Service Interval: Every 100 hours/Yearly (whichever
comes first)
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air-intake screen, the recoil starter,
and the fan housing
4. Clean the debris and grass from the engine
parts.
5. Install the air-intake screen, the recoil starter,
and the fan housing
Figure 85
1. Engine guard
2. Engine air-intake screen
3. Bolt
(Figure 85).
(Figure 85).
4. Fan housing
5. Screw
Checking and Cleaning the
Hydraulic-Unit Shrouds
Service Interval: Before each use or daily
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Move the seat forward.
4. Clean the debris and grass from the
hydraulic-unit shrouds
5. Position the seat.
1. Hydraulic-unit shrouds
g004218
60
(Figure 86).
Figure 86
g009922
g015117