Z-Wave Device Setup - Honeywell Tuxedo Touch User Manual

Using Z-Wave Devices and Scenes (cont'd)

Z-Wave Device Setup

Changing the Name
To change the Z-Wave device icons, do the following:
1. Press Automation > Z-Wave Setup to display the "Z-Wave Device Management" screen.
2. Press Z-Wave device to be edited.
3. Press on the text box and press Go when finished.
Changing the Icon
1. Press the Z-Wave device to be edited.
2. Beneath device name, select the icon to represent the switch.
NOTES:
• This applies to Binary, Multilevel Switches and Water Valves.
• The FortrezZ® Water valve learns in as a Water Faucet icon by default, but is changeable. All other water valves
may learn in as a binary.
• Changing the icon for a binary switch to Water Valve also excludes it from the "All Switches On/Off" command.
Device Icon Options
Light Light Garage
Bulb Switch Door
Secondary Tuxedo Note
Any device assigned to a water valve icon on the primary Tuxedo must be assigned to the same device on the secondary
Tuxedo. Failure to do so results in the water valve responding to the "All Switches On/Off command."
Sprinkler Pool Water
Faucet
23
Window Siren
Strobe
Sounder
Fan