Creating Scenes In Total Connect; Viewing And Controlling Total Connect Scenes From Tuxedo - Honeywell Tuxedo Touch User Manual

Creating Scenes in Total Connect

The following table summarizes the relationships between Total Connect scenes and Tuxedo scenes:
Controlling
Device
Total Connect
Tuxedo
Note: For troubleshooting purposes, Total Connect server information (including IP addresses) can be viewed on the
Total Connect Server Setup screen by pressing TC Server Info.
Use the Automation section of the dashboard in Total Connect to create up to 20 scenes. Refer to the Total Connect
Online Help Guide for further details and device limitations for creating an automation scene.
Scene triggers and actions created in Total Connect can be edited only from Total Connect. Scene
conditions cannot be programmed through Total Connect.

Viewing and Controlling Total Connect Scenes from Tuxedo

Use the Scenes icon to display and control scenes that have been created in Total Connect.
1. From the "Home" screen, press Automation
scenes created in Total Connect.
NOTE: Pressing Local allows you to view a list of scenes created in Tuxedo on (not Total Connect) and manually
run them.
2. To control a Remote scene, select the desired scene, and then press the appropriate action (ex. Run).
Remote Access (cont'd)
Scenes created in Total Connect
View Edit Scenes
yes yes
yes no
> Scene Setup
55
Scenes created in Tuxedo
View Edit Scenes
no no
yes yes
> Remote. The screen displays a list of