Z-Wave Devices, Scenes & Total Connect (Automation) Using Z-Wave Devices; Manual Z-Wave Device Control - Honeywell Tuxedo Touch User Manual

Z-Wave Devices, Scenes & Total Connect (Automation)
Using Z-Wave ® Devices
Before a Z-Wave device will work in the home control network, it must be added (also called included) into the network.
View the "Programming of Z-Wave Devices" training video and follow the instructions below to add and control devices in
a home control network.
EXISTING NETWORK NOTE: Z-Wave products from other manufacturers can be included (added) into the
Tuxedo network at any time. Z-Wave devices that are always powered can serve as repeaters regardless of
manufacturer
WARNING: Automation is intended for lifestyle convenience. Do not use automation for life safety and property
protection.
Automation functionality is supplementary only.
U L
Z-Wave applications have not been evaluated for UL compliant applications.
Access control functionality has not been evaluated for UL compliant applications.

Manual Z-Wave Device Control

To access the list of Z-Wave devices
and view the status of the enrolled
devices, press Automation
Slide Bar > On/Off, Open/Close,
Temperature to control the Z-Wave
modules.
The Z-Wave devices are group in the
following order: Thermostats, Door
Locks, Garage Doors, Multi-Level.
Switches, Binary Switches, Water
Valves and Shades.
>
18