E-Mail Setup - Honeywell Tuxedo Touch User Manual

Power Mode Setup
Power Mode allows you to reduce power consumption in the event of a system trouble such as AC Loss or Panel Low
Battery.
Select Power Save Mode to enable; then choose Turn-off Network, or Override Display Settings.
Press Apply to save settings.

E-Mail Setup

The email options allows you to set up email accounts and receive email notifications when one or more system events
occur.
Users can receive email notifications when one or more selected system events or conditions occur.
NOTE: Email notification require an active users email address and note the disclaimer at the bottom of the page. "Email
notification is strictly for convenience use only. Avoid relying on this feature for life critical events. It is not UL
certified and may fail at any time without notice."
NOTES:
• Email notification requires that you have an active email address.
• An SMTP account needs to be assigned to establish the email server domain (i.e., the "from" address).
• 4 programmable sets of events (labeled "Event 1 – Event 4").
• Each event 1-4 can send email notifications to up to four email addresses.
• 7 event types and corresponding conditions can trigger an email.
User Email Setup
1. To set up an email notification, from the Home screen, press Setup
2. Select User SMTP to set up the user's email server information (user domain/server, which provides the "from" email
address).
a. Select the email server name (email provider). Choose from GMAIL, OUTLOOK, YAHOO, or Add New E-mail
Server.
b. Enter the email ID (user name) and password for the chosen email server on the appropriate lines.
c. The Email Server and SMTP port number fields are automatically filled unless "Add new email server" was selected.
If "Add new E-Mail Server" was selected, enter the email server SMTP and port number information (see your email
provider for details).
To change the "E-Mail Server Name," press Edit
Enter an "E-Mail ID" and password. Enter the "E-Mail Server" address and "SMTP Port Number." If required by the
e-mail service provider, press on the box next to USE SECURE CONNECTION (SSL).
d. Press Save .
3. Press Event 1 to define the desired event notifications to be sent. Select the desired event types and conditions for this
Event and press Save.
4. Enter the email address (es) to which Event 1 will send a notification; press Save when done. User notifications are
restricted to one SMTP (from) email address. Repeat steps 3 & 4 for Events 2-4 if desired.
5. Press E-MAIL LOG to view the email log; press CLEAR LOG to remove the email log.
Setup Menus (cont'd)
and enter a new server name.
47
and Email .