System Troubles - Honeywell Tuxedo Touch User Manual

System Troubles

The "Security" screen also displays an icon(s) if a system trouble(s) occurs. If a Trouble icon is shown, contact your alarm company. The
following icons may be shown as applicable to your system:
ICON
AC Loss – The system is not receiving AC power.
Bell Failure – The system bell or siren has a problem. Note: This icon displays when interfacing with
residential panels only.
Expander Failure – The system has a failure in an expansion module.
Low Battery – The system battery, that powers the system during an AC power loss, is low.
LRR Supervision Failure – The Communication Device used to communicate with the central station has
a supervision failure
Max Attempts Exceeded – The system has exceeded the maximum attempts to communicate with the
Central Station.
Pager Failure – The system cannot communicate with an assigned pager.
Telco-1 Cut – The system is not able to communicate with the central monitoring station over the primary
phone line.
Telco-2 Cut – The system is not able to communicate with the central monitoring station over the
secondary phone line.
Wireless Failure – The system is not able to communicate with its wireless devices.
Note: If multiple faults exist, press More Choices and then Show Zones to view and scroll through the complete list of faults.
FUNCTION
57