SCAN SECURITY
ICON
2. At the Z-Wave thermostat:
a) Select Thermostat; set the Time/Date.
b) Follow the instructions in the
thermostat Installation Guide for
"Z-Wave enrollment".
c) To complete inclusion, press Done.
d) Press Exit to return to normal
operation.
3. At the Tuxedo Touch Keypad:
a) To verify activation, press the Back icon
and wait 30 seconds. Press the Refresh
icon; the new device is displayed.
U L
Access control functionality has not been evaluated by UL and may not be used in UL Listed applications.
Editing Z-Wave Device Names
Edit a Device Module Name
To edit a device name, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and press the Z-Wave
Setup icon to display the "Z-Wave
Device Management" screen.
b) Highlight the device name and press the
Z-Wave Edit icon.
c) On the "Data Entry" keyboard, press
Clear and enter a new name.
d) Press OK.
Automation (cont'd)
ACTION
The keypad displays a series of messages:
ACTION
NOTES
"Please press function key on device"
"Adding Controller Unit"
"Adding Slave Unit"
"Device added successfully"
NOTES
Enter the new device name on the data entry keyboard.
Notes:
• Use the Shift icon for capital letters.
• Use the BS (Backspace) icon to make corrections.
The @#$ icon is not available for use at this time.
36