Honeywell Tuxedo Touch User Manual page 33

Using Z-Wave Devices and Scenes (cont'd)
Voice Input Command
Review the "Tuxedo Touch Voice Command Training Video" before the initial trigger assignment. The Voice Input
Command is configured in "Scene Setup." Voice Commands are accessed by pressing "Voice Input Command," which
provides a drop down window revealing the following commands.
Review the screen shot below. In this setup, the trigger is Bedtime and
the action is light (could be light off, on, or dim to a certain level using
the slide bar).
Successful Command will trigger the action configured in the scene. The keypad will speak "Processing
XXXX command" (XXXX = the command).
Unsuccessful Command will not trigger the action configured in the scene. The keypad will not give a
confirmation by display "Please retry by saying the Hello Tuxedo trigger phrase followed by one of the
commands: Bed Time, Evening Time, Leaving the House, Returning Home, Wake Up, and Camera". See
the "Voice Tutorial and Setup" section for troubleshooting steps.
If the keypad heard you and could not understand the request it will display"
The Camera Command is an individual trigger, which launches the camera home page, it cannot be assigned to
scene.
Voice Input Command is supplementary only
U L
and not evaluated for UL applications.
29
Available Commands
Bed Time
Evening Time
Leaving the House
1. After assigning a voice trigger to the scene, exit the
scene setup page.
2. Speak the voice command "Hello Tuxedo." The
keypad will speak "Please Wait...," followed by "Hello
Tuxedo (XXX), Please say your command." The
XXX= the command voice accuracy (see the "Voice
Tutorial and Setup" section for more information).
3. Speak the selected voice command above. It will be
either successful or unsuccessful.
Returning Home
Wake Up
Cameras