User Codes - Honeywell Tuxedo Touch User Manual

User Codes

Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features
and functions. Tuxedo can hold the identity for 10 Users in its memory. If additional Users are needed, define the
additional Users using the Console Emulation Mode.
Users for the system are programmed in a central user setup location that provides the specific questions for authorization
levels assigned to different users. You may want these users to be the same, but there are situations in which you may
want a user to have limited capabilities. These capabilities are defined by the Authority Level assigned each user.
Authority Levels
Authority levels define the system functions a user can perform. Depending on the authority assigned to you, there are
certain system functions you may be prohibited from performing. The following information describes the authority levels
that can be assigned through the keypad and provides the equivalent authority level name found in your alarm system
manuals. The authority levels that can be assigned are as follows:
Authority
Functions
Level
Master
Can perform all security functions, add/delete
users in assigned partition, program scheduled
events, and change partition master code
Normal Perform security functions (arm, disarm)
Guest
Can arm the system in assigned partitions, but
cannot disarm the system unless the system
was armed with this code.
Note: Do not assign this level if Quick Arm is
enabled in your system.
No
Used to restrict access from a partition.
Access
The authorized code for adding users is dependent upon the alarm panel you are interfacing with. Check your alarm panel
Installation and Setup Guide to determine who can add users.
Note: User 2 on residential panels is used to add users, this code cannot be assigned to a Tuxedo user. The Error "Enter
value between 003-XXX." Where XXX = the maximum number of zones the panel supports.
Using the Security System (cont'd)
39
Equivalent System Name
Residential Systems
Partition Master
Standard User
Guest
N/A
Commercial Systems
Level 1 Master
Level 3 Operator A
Level 4 Operator B
N/A