Video Functionality; Playback - Honeywell Tuxedo Touch User Manual

Using Pictures, Cameras and Videos (cont'd)

Video Functionality

Video Converter is required to convert videos for proper playback on the Tuxedo. Use an Internet search engine to locate
and download a Video Converter, then follow the steps in the Video Converter Instructions (provided in the carton).
Press Product/Training Video
video to learn more about this feature.
To play a video:
Insert your personal media (SD/SDHC) card (with stored video files). Formats supported are MPEG4 and H.264,
containers AVI, MOV, MP4.

Playback

SD Card Playback
From the "Home" screen, press Multi-Media
Verify "SD" is highlighted and use the slide bar to scroll through the video list. Highlight a video file from the list and press
Play to start the selected video file.
Press Repeat to continually replay the selected video. Deselect Repeat to automatically play the complete list of
video files starting with the first video and ending with the last.
Press Pause or view a Full View
Notes:
•
Maximum video resolution should not exceed 640 x 480.
•
If the video file causes Tuxedo to lock, use a small object (such as a paper clip) to press Reset located in the
lower right-hand side of the keypad to reset it.
•
To exit Full View mode at any time while a video is playing, press anywhere on the screen. When in Full View
mode there is an 8-10 second delay for video display.
Critical Events Playback
"Critical Event" options are enabled while configuring scenes in Automation. To configure critical events see the "Scene
Setup" setup section.
From the "Home" screen, press Multi-Media
1. Press Video.
2. Press Events. The message "Please Wait – Loading Events."
3. Select the critical video event
4. Press Play to review the video.
(located on the Home screen) and view the "SD Card Video Playback" training
> Video
.
> Video
10
> Video.
.