Automation; Enroll/Add Z-Wave Devices - Honeywell Tuxedo Touch User Manual

The Tuxedo Touch Home Automation System with web hosting capability is equipped with Z-Wave technology and
is designed to automate devices in a home control network. The keypad allows you to easily add and control multiple
devices with the press of a button. View the "Programming of Z-Wave Devices" training video and follow the
instructions below to add and control devices in a home control network.
• Automation functionality is supplementary only and has not been evaluated by UL.
U L
• Z-Wave applications have not been evaluated by UL.

Enroll/Add Z-Wave Devices

Each device must be installed according to the manufacturer's instructions prior to enrollment.
WARNING: Automation is intended for lifestyle convenience. Do not use automation for life safety and property protection.
Enroll a Light, Switch or Outlet Module
Enroll a Z-Wave Light, Switch or Outlet module as described below.
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press the
Z-Wave Setup icon to display "Z-Wave
Device Management" screen.
b) Press the Z-Wave Enroll/ Add icon.
2. At the device Module:
a) Press the Function Key on the device.
Z-Wave Device Management Icons
Enroll/Add
Remove/Delete

Automation

ACTION
Edit
Remove Failed
Abort
34
NOTES
Note: Z-Wave light modules may vary; follow the instructions in the Users
Guide for your specific device to enroll properly into the Z-Wave network.
• If a dimmer module was enrolled, an On/Off button and a slide bar (to
control dimmer) are displayed.
• If an on/off light/appliance module was enrolled, an On/Off button (to
control the device) is displayed.
The keypad displays a series of messages:
"Start add device. Please press function key on device"
"Adding Controller Unit"
"Adding Slave Unit"
"Device added successfully"
Reset Default
Router
Link
Security