Automation; Include/Add Z-Wave Devices - Honeywell Tuxedo User Manual

The Tuxedo Touch Home Automation System with web hosting capability is equipped with Z-Wave technology and
is designed to automate devices in a home control network. The keypad allows you to easily add and control multiple
devices with the press of a button. Follow the instructions below to Include Z-Wave enabled devices into a home
control network using the Tuxedo Touch keypad and follow the instructions in the Z-Wave device User Guide for
your specific device.
• Automation functionality is supplementary only and has not been evaluated by UL.
U L
• Z-Wave applications have not been evaluated by UL.

Include/Add Z-Wave Devices

Each device must be installed according to the manufacturer's instructions.
WARNING: Automation is intended for lifestyle convenience. Do not use automation for life safety and property protection.
Include a Light, Switch or Outlet Module
Install a Z-Wave Lamp module, Switch or Outlet module as described below.
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the "Home"
screen and then press the
Z-Wave Setup icon to display "Z-Wave Device
Management" screen.
b) Press the Z-Wave Include/ Add icon.
2. At the device Module:
a) Press the Function Key on the device.
Z-Wave Device Management Icons
Include/Add
Exclude/Delete

Automation

ACTION
Edit
Remove Failed
Abort
33
NOTES
Note: Z-Wave light modules may vary; follow the instructions in the
Users Guide for your specific device to include properly into the Z-Wave
network.
• If a dimmer module (multi-level switch) was included, an On/Off
button and a slide bar (to control dimmer) are displayed.
• If an on/off light/appliance module (binary switch) was included, an
On/Off button (to control the device) is displayed.
The keypad displays a series of messages:
"Start add device. Please press function key on device"
"Adding Controller Unit"
"Adding Slave Unit"
"Device added successfully"
Reset Default
Router
Link
Security