100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mb/s Ethernet Carrier Sense Multiple Access with
Collision Detection (CSMA-CD) connectivity using multimode optical fiber. The part number
for this model is AA1419074-E6
The 100BASE-FX SFP supports the 5600 Series switches.
The following table describes the 100BASE-FX SFP specifications.
Table 2: 100BASE-FX SFP specifications
Maximum electrical power consumption
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Maximum launch power
Minimum launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
T1 SFP specifications
The T1 SFP provides full-duplex Fast Ethernet to T1 connectivity. The part number for this
model is AA1419075-E6.
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
100BASE-FX SFP specifications
Specifications
1.5 W
Duplex LC (Lucent connector)
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Up to 2 km using 500 MHz-km MMF optic
cable
1310 nm
10 dB
-14 dBm
-23.5 to -20 dBm
-33.5 dBm
—
December 2013
31