Chapter 7: Xfp Specifications; Xfp Labels - Avaya Ethernet Switch 5000 Series Manual

Chapter 7: XFP specifications

This section provides technical specifications for the supported 10 gigabit SFP (XFP) models. Use these
specifications to aid in network design.
The specifications in this section are a subset of the IEEE 802.3ae and 802.3aq specifications. For more
information, see these standards documents. All Avaya XFPs meet or exceed these standards.
Important:
Avaya recommends that you only use Avaya-qualified XFPs. If you do choose to use other vendor
XFPs, be aware that Avaya does not support the use of other XFPs.
Navigation
•

XFP labels

on page 55
• General XFP specifications
• 10GBASE-SR XFP specifications
• 10GBASE-LRM XFP specifications
• 10GBASE-LR/LW XFP specifications
• 10GBASE-ER/EW XFP specifications
• 10GBASE-ZR/ZW XFP specifications
XFP labels
As shown in the following figure, the Avaya label on a typical XFP contains a Avaya serial
number, a bar code, a manufacturer code, an interface type, and a part number.
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
on page 56
on page 56
on page 58
on page 60
on page 62
on page 63
December 2013 55