Product Safety Warnings And Information; Esd And Installation Caution Messages - Avaya Ethernet Switch 5000 Series Manual

4. Remove lint by blowing compressed air into the optical port.
5. Reconnect the optical connector and check for proper function.

Product safety warnings and information

The products described in this guide meet requirements of:
IEC 60950 3rd edition
CSA 22.2 No. 60950 3rd edition
UL 60950 3rd edition
EN60950 3rd edition
EN60825-1, +A11, +A2

ESD and installation caution messages

This section provides electrostatic discharge (ESD) and installation caution messages.
Electrostatic alert:
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an antistatic wrist strap
connected to an ESD jack.
Electrostatic alert:
ATTENTION
Risque d'endommagement de l'équipement
Pour prévenir tout dommage dû à une décharge électrostatique, vous devez toujours porter
un un bracelet antistatique connecté à une prise ESD.
Electrostatic alert:
ACHTUNG
Risiko eines Geräteschadens
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
If you are not reinstalling the connector, be sure to use a protective cap.
If problems persist, ensure that the connector or receptacle is free from damage.
Product safety warnings and information
December 2013 17