SFP specifications
Important:
Avaya recommends setting all 1000BaseT ports to auto-negotiate in accordance with the
IEEE 802.3ab standard. By default, SFPs inserted into certain product-specific modules are
set for autonegotiation = True.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 8: IEEE 802.3z 1000BASE-T SFP specifications
Standards
Connectors
Cabling
Distance
1000BASE-SX (LC) SFP specifications
The 1000BASE-SX SFP provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm using
multimode optical fiber. This SFP supports full-duplex operation only. The part number for this
model is AA1419013-E5.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-
SX SFP.
Table 9: IEEE 802.3z 1000BASE-SX (LC) SFP specifications
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
36
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
IEEE 802.3z, IEEE 802.3ab
RJ-45
CAT5E or better UTP
Up to 100 m
Specifications
Duplex LC
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
• up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
850 nanometers (nm)
7.0 deciBels (dB)
December 2013