1000Base-Zx Cwdm Sfp Specifications - Avaya Ethernet Switch 5000 Series Manual

attenuation of 4 dB when you test the CWDM SFP in loopback mode, or use short runs of
fiber with no intermediate CWDM OADM or CWDM OMUX.
Table 12: 1000BASE-XD CWDM (40 km) SFP specifications
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Operating temperature range
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power

1000BASE-ZX CWDM SFP specifications

The 1000BASE-ZX SFPs provides CWDM gigabit Ethernet connectivity using single mode
fiber. These SFPs support full-duplex operation only. The part numbers of the 70 km models
range from AA1419033-E5 to AA1419040-E5.
Important:
For the 70 km CWDM SFPs, a minimum attenuation of 10 dB must be present between the
transmitter and receiver.
Table 13: 1000BASE-ZX CWDM (70 km) SFP specifications
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Operating temperature range
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
Parameter
1000BASE-ZX CWDM SFP specifications
Specifications
Duplex LC
SMF, 9 µm
1.0 Gb/s
1.25 Gb/s
0 to 60C
17 dB
– 4.0 to 1.0 dBm
– 21 dBm
– 3.0 dBm
Specifications
Duplex LC
SMF, 9 µm
1.0 Gb/s
1.25 Gb/s
0 to 60C
December 2013 39