10Gbase-Lr/Lw Xfp Specifications - Avaya Ethernet Switch 5000 Series Manual

XFP specifications
Fiber type (core diameter
and OFL bandwidth)
• 400 MHz-km at 850 nm
• 400 MHz-km at 1300 nm
50 μm (ISO/IEC OM3)
• 1500 MHz-km at 850 nm
(includes laser launch
bandwidth)
• 500 MHz-km at 1300 nm
(includes laser launch
bandwidth)
In the table, FDDI denotes Fiber Distributed Data Interface, ISO denotes International
Standards Organization, IEC denotes International Electrotechnical Commission, and OFL
denotes Over Filled Launch.
The following table is based on the 802.3aq standard and specifies the measurement
conditions for each fiber type.
Table 28: Launch conditions for each fiber type
Parameter
Optical launch for OM1 and
FDDI-grade fiber
Optical launch for OM2 and
50 μm 400/400 fiber
Optical launch for OM3 and
50 μm fiber

10GBASE-LR/LW XFP specifications

The 10GBASE-LX XFP provides 10 GbE or OC-192 service at a nominal wavelength of 1310
nm. This XFP can attain link lengths of up to 10 km.
The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW
XFP. The part number of this XFP is AA1403001-E5.
For more information about the 10GBASE-LX XFP, including test and measurement
information, see the IEEE 802.3ae standard.
60 Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Range
Up to 220 m
Minimum encircled flux
• 30% within 5 μm radius
• 81% within 11 μm radius
• 30% within 5 μm radius
• 81% within 11 μm radius
• 30% within 5 μm radius
• 81% within 11 μm radius
Comments? infodev@avaya.com
Maximum channel
insertion loss
1.9 dB
Notes
Uses 62.5 μmmode
conditioning patch cord
Uses 50 μmmode
conditioning patch cord
—
December 2013