Set Sprayer Limits (Optional) - Graco XM Series Operation Manual

Basic Operation

Set Sprayer Limits (Optional)

NOTE:
For details regarding the limits setup screens, see User
Limits Setup Screens, page 68.
To set and adjust pump pressure limits and temperature
limits:
1. Select in the Enable Setup 2 screen. See
Enable Setup Screens, page 66, for instructions.
2. From the Home Setup screen press
to the limits screens.
3. Follow the instructions in Set Pressure Limits and
Set Temperature Limits.
Set Pressure Limits
Use the following instructions to set pressure limits for
each pump that if met will issue an advisory and/or
warning.
To set pressure limits, press
through each field, and press
selectable. Press
sure digit, and press
optional values. Continue this process until you reach
the desired pressure limit. Press
NOTE:
The B pump pressure always runs 10-20% higher than
the A pump pressure.
26
to jump
and to move
to make a field
to scroll through each pres-
and to scroll through the
to save.
Set Temperature Limits
Use the following instructions to set temperature limits
that if met will issue an advisory and/or warning.
Press to move to the temperature limits screen.
To set temperature limits, press
through each field, and press
selectable. Press
ture digit, and press
optional values. Continue this process until you reach
your desired temperature limit. Press
value.
NOTE:
The allowable range for the temperature setpoint is 34° -
160°F (1° - 71°C).
and to move
to make a field
to scroll through each tempera-
and to scroll through the
to save the
312359J