EverFocus EDN288MS User Manual page 27

7. Event signal icons
When an event is triggered, the alarm icon
and blink to alert the user. Click the icon to view the alarm information. On the pop-up window,
click Disarming / Arming to stop / start prompting alarm information, click Clear Alarm to remove
the current alarm information from the list.
8. Snapshot
Click the Snapshot button to take a snapshot, and the storage folder will pop up automatically. By
default, the snapshot will be saved at C:\Program Files\Preview. To change the location, see Live
View Snapshot in 7.1.10 Local Settings.
9. Record
Click the Record button to start / stop recording the current video stream. By default, the recordings
will be saved at C:\Program Files\REC. To change the location, see Live View Recording in 7.1.10
Local Settings.
10. Two-way Audio
The Stainless Steel models do not support audio function.
Click the Two-way Audio buttons to switch the sound on / off for the speakers and microphones (if
such external devices have been connected to the camera directly or via the network). To activate
the Audio function, the Complex Stream must be selected. See Stream in 7.2.1.2 Stream Settings.
Note that the camera provides the TRS line-in / out terminal I/O, therefore, TRS microphones /
speakers with a (built-in) amplifier and external power supply are required.
11. Full Screen
Click to display the current camera stream in full screen. To exit full screen, right-click the mouse or
press the ESC button on the keyboard. Under full screen mode, these icons on the top-right corner
of the window help you quickly be alerted of motion events, turn the audio on/off and take
snapshots.
When a motion event is triggered, the alarm icon will turn red
The Stainless Steel models do not support audio function. Click the Audio button to switch the
sound on / off for the speakers (if such external devices have been connected to the camera directly
or via the network).
Click the Snapshot button to take a snapshot.
Stainless Steel 2MP/3MP/4MP Network Cameras
at the top of the Live View window will turn red
21
to alert the user.