EverFocus EDN288MS User Manual page 20

4. If you log in for the first time, follow the on-screen instructions to update the latest Plugin version
(ePlayer). After reloading the webpage, the login window pops up again. Type the user ID and
password to log in again. By default, the user ID is user1 and the password is 11111111
5. Now you are able to see the remote live page.
Note:
1. The "Download ePlayer Instruction" page will only be prompted for the first time login in order to
update the system to the latest Plugin version.
2. If the Error window appears, please be sure to
click Retry. When the Completing the ePlayer Setup Wizard window shows up, click Finish. Then,
you can open a new browser again to access the camera's remote Web interface.
3. To enable Remote Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer, some
settings have to be complete. Please refer to 5.2 Settings for Microsoft Internet Explorer in the
User's Manual.
4. The default IP mode of the IP camera is DHCP. However, if there is no dynamic IP address assigned
to the device, its IP will switch to 192.168.0.10
Stainless Steel 2MP/3MP/4MP Network Cameras
close ALL the Web browser windows first
14
and then