Related Manuals for EverFocus ED910
Summary of Contents for EverFocus ED910
- Page 1 ED910 & ED930 720p Analog High Definition True Day/Night Indoor Dome Camera User’s Manual Copyright © EverFocus Electronics Corp, Release Date: Nov., 2014...
- Page 2 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
- Page 3 Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 4: Table Of Contents
Contents 1. Introduction........................5 Packing List ........................5 Features .......................... 6 2. Cable Description ......................6 3. Installation ........................7 Installation and Adjustment ................... 7 4. Configuration in the OSD Menu ..................13 5. Specifications ........................17... -
Page 5: Introduction
This is the camera that you have been waiting for to create analog CCTV systems that produce astounding image clarity in a wide range of indoor applications at the widest range of light levels. The ED910/930 supports both NTSC and PAL scanning systems, which can be switched via OSD. -
Page 6: Features
ED910/930 eZ.HD Indoor Dome Camera 1.2 Features 720p with high flexibility and performance for astounding image 1/2.8" SONY 1.37M pixels CMOS, delivers amazing high sensitivity Vari-focal 2.8~12mm DC iris lens to capture the desired field of view ... -
Page 7: Installation
ED910/930 eZ.HD Indoor Dome Camera 3. Installation 3.1 Installation and Adjustment ED910 without LED ED930 with LED Camera Breakdown... -
Page 8: Important Notice
ED910/930 eZ.HD Indoor Dome Camera Important Notice Please be noted the camera Base Plate may loosen when you take out the camera from the pack. It is because the Base Plate is attached to the Camera Body without locking tightly in order to simplify the installation procedure. - Page 9 ED910/930 eZ.HD Indoor Dome Camera Rotate counter-clockwise to remove the camera cap, press and pull to remove the liner. Remark: Hold the liner with one hand, press and pull to remove the liner (refer to the “arrow” label which marked to the liner) Push the inner click outward and rotate the base plate counter-clockwise, then remove the camera body from the base plate.
- Page 10 ED910/930 eZ.HD Indoor Dome Camera Screw the base plate to the wall / ceiling using the supplied three screws. Note that if you want to wire the cables through the wall / ceiling, break the middle part of the base plate.
- Page 11 ED910/930 eZ.HD Indoor Dome Camera Connect the camera to the 12 VDC or 24 VAC power source and an AHD DVR or a monitor. Optionally connect the camera to a monitor using the supplied Test Lead for adjusting camera angles, focus, zoom and configuring OSD menu a.
- Page 12 ED910/930 eZ.HD Indoor Dome Camera c. To configure the OSD Menu, using the function button. Note: The function button is not only for direction control, also for switching Video format and Video output. Please follow the detailed instruction as below: ...
-
Page 13: Configuration In The Osd Menu
ED910/930 eZ.HD Indoor Dome Camera 4. Configuration in the OSD Menu You can use the function buttons on the rear panel of the camera body to configure camera settings in the OSD menu: Main Sub Menu Sub Menu / Function... - Page 14 ED910/930 eZ.HD Indoor Dome Camera Default Select Area1*, Area2, Area3, Area4 Display Position, Size,↑,↓,→,← Black On*/Off Mask HSBLC Level 0-100(20*) All Day* Model Night AGC Level 0-255(48*) Default ATW* AWC→SET Indoor White Outdoor Balance Blue 1-500(50*) Manual 0-100(50*) 0-60(1*) D→N(Delay) (Ext* for ED930) N→D(Delay)
- Page 15 ED910/930 eZ.HD Indoor Dome Camera Neg. Off*/On Image Off* Select Area1*,Area2,Area3,Area4 Position, Size,↑,↓,→,← Display Sensitivity 0-100(64*) Color Green*, Blue, White, Red 1.00*,0.75,0.50, Motion Trans 0.25 View Type Off, Block, Outline, All* OSD View On*/Off Alarm Alarm Out On*/Off Alarm Sig...
- Page 16 ED910/930 eZ.HD Indoor Dome Camera x2*, x4, x6, x8,x10, x15, Sens-up x20, x25, x30 Off* Pos/Siz Position, Size,↑,↓,→,← Black DPC Start Press Enter DPC View Off*/On Level 0-255(255*) CAM ID 0-255(1*) RS485 ID Display Off*/On Baud Rate 2400,4800,9600,19200 ,38400 Level...
-
Page 17: Specifications
ED910/930 eZ.HD Indoor Dome Camera 5. Specifications ED910 ED930 Pickup Device 1/2.8" SONY 1.37M pixels CMOS Video Format NTSC and PAL( can be switched via OSD) Effective Pixels 1280 (H)*720 (V) Scanning System Progressive Scan Sensitivity 0.08 Lux 0 Lux with IR on... - Page 18 ED910/930 eZ.HD Indoor Dome Camera EverFocus Electronics Corp. EverFocus Taiwan: EverFocus Europe - Germany: 12F-1, No.79, Sec. 1, Shin-Tai Wu Road, Albert-Einstein-Strasse 1, D-46446 Hsi-Chih, New Taipei City, Taiwan Emmerich, Germany TEL: +886 2 2698 2334 TEL: +49 2822 93940...