Stainless Steel 2MP/3MP/4MP Network Cameras
7.3.2. Notification
7.3.2.1.
Email Settings
Sender Address: Input the sender's e-mail address, so that the receiver can recognize the sender
when an event message is received.
Password: Input the user's login password if the SMTP server requires authentication.
Confirm PWD: Type the password again to confirm it.
SMTP Server: Enter the IP address or the host name of the SMTP server used to send e-mails.
SMTP Port: Enter the port number for SMTP.
Email Sending Interval: Input the interval time for sending e-mail notification.
Email Title: Type the e-mail title.
Receiver Address: Input the e-mail addresses for receiving an e-mail message when events occur.
Currently only one receiver address can be configured.
Enable SSL: Check the box to enable the SSL function. Enable this function means you can access
the camera through the SSL protocol that provides communication security over the Internet.
After complete the settings, click Save to apply the settings.
58