Table of Contents
Advertisement
To enable the Multicast Function:
1. Complete the installation of the IP cameras, routers / switches and computers (refer to diagram above).
2. Access to the Web UI of the IP camera to enable the Multicast function. Click the Save button to save
the setting. (System > System Settings > Network > Multicast Settings > Enable Multicast)
3. Go to the setting page of the router / switch to enable the Multicast function.
Here we use a D-Link DIR655 router and EverFocus 24-port switch for example.
4. The Multicast function setup is now complete.
Stainless Steel 2MP/3MP/4MP Network Cameras
69
Advertisement
Table of Contents
