Stainless Steel 2MP/3MP/4MP Network Cameras
7.1.7. System Information
You can check the system information or set up NTSC / PAL on this page.
Device Name: If required, enter a desired name for the machine. This name will be visible in the
Machine Name field of the IP Utility software.
Model Name: Display the model name of the camera. The values cannot be changed on this page.
Device Type: Display the device type. The values cannot be changed on this page.
Firmware Version: Display the current software version. The values cannot be changed on this page.
Format: Select NTSC (60Hz) or PAL (50Hz) for your local scanning system.
Note: Modifying the Format will cause the system to reboot automatically. Please create a new
network connection to the IP camera when the reboot is complete.
After complete the settings, click Save to apply the changes.
39