EZN288MS / EZN368MS / EZN468MS:
To find the SD Card Slot on the camera module, use the supplied Hexagon Wrench to unscrew the 4
screws on the rear side of the camera and then slowly pull out the camera module. After inserting the
SD card, place a Desiccant Bag inside the module, put the module back to the housing and then tightly
screw back the module. The Reset Button is on the cable.
Note: There is already a Desiccant Bag placed inside the camera module before shipping. It's
recommended for users to prepare a Desiccant Bag and place it inside the camera module every
time when you pulled out the camera module from the housing.
Reset Button
Stainless Steel 2MP/3MP/4MP Network Cameras
5
SD Card Slot
Desiccant Bag