Cables; Sd Card Slot And Reset Button - EverFocus EDN288MS User Manual

3.2 Cables

The cables provide connections for connecting to the Network and Power. You can also power up the
camera through PoE. The Reset Button cable is only available for EZN models.

3.3 SD Card Slot and Reset Button

You can use the SD Card and the Reset Button to:
SD Card Slot:
Optionally insert a micro SD card to the card slot for recording videos. Before inserting a micro SD card,
make sure you turn off the camera first.
Note: This IP Camera supports micro SD/SDHC/SDXC card up to 128GB. You can go to the
Download page on the product website to find the Storage Compatibility Table for viewing the
tested SD cards. Please visit EverFocus' Website
Reset Button:
1. Reboot the camera: When the camera is powered up, press the Reset Button will reboot the camera.
2. Restore the camera: Keep the Reset Button pressed, at the same time unplug the camera power
then plug it back again will return camera settings to the factory default values.
EDN288MS / EDN368MS / EDN468MS:
To find the SD Card Slot and the Reset Button on the camera module, remove the camera cover using
the supplied Hexagon Wrench. After inserting the SD card, be sure to place the supplied Desiccant Bag
inside the module and then tightly screw back the camera cover.
Reset Button
(only for EZN models)
LAN / PoE Cable
Stainless Steel 2MP/3MP/4MP Network Cameras
12VDC Input
www.everfocus.com.tw
4
Desiccant Bag
Reset Button
SD Card Slot