EverFocus EDN288MS User Manual page 16

EZN288MS / EZN368MS / EZN468MS:
1. Optionally screw the sunshield to the camera (please refer to 1.2 Optional Accessory.
2. Optionally insert a micro SD/SDHC/SDXC card into the card slot. Please refer to 3. SD Card Slot and
Reset Button.
3. Before screwing the camera to the wall/ceiling, stick the Mounting Sticker on the wall/ceiling to mark
the position for installation. Drill four screw holes on the wall/ceiling according to the supplied
Mounting Sticker and push the supplied 4 Screw Anchors into the holes on the wall/ceiling. Drill
another hole in the middle inside the area only if you want to run the cables through the wall/ceiling.
4. Place the camera's bracket against the anchoring surface so that the holes line up. Screw the camera
to the wall/ceiling using the supplied 4 Screws.
Wall/Ceiling
Stainless Steel 2MP/3MP/4MP Network Cameras
Screw Hole Position
Drill a hole if you want to
run the wires through
the wall/ceiling.
Screw
Bracket
10