Automatic Maintenance Feature And Notes; Measures When The Printer Is Not In Use For A Prolonged Period - Roland VersaUV LEC2-300 Regular Maintenance Manual

Basic Maintenance Knowledge

Automatic Maintenance Feature and Notes

This machine has a feature that automatically performs maintenance periodically.
This function performs operations for preventing the print heads from drying out, so:
• Always keep the main power switched on.
• Do not leave the front cover open for a long time.
• Return to the top menu after specifying settings in the menus.

Measures When the Printer Is Not in Use for a Prolonged Period

Be sure to follow the instructions shown below when the printer is not in use for a prolonged period.
• Empty the drain bottle.
If you know that you will not use the machine for a prolonged period, empty the drain bottle. When the main
power is on, the machine periodically performs automatic maintenance in which fluid is discharged.
The drain bottle is filled when the following periods elapse. Leaving the drain bottle as-is will lead to the
discharged fluid overflowing.
¾ Approximately 2 weeks after the message "EMPTY DRAIN BOTTLE" is displayed
" P. 14 "If the Discharged Fluid Disposal Message Appears"
¾ Approximately 80 days after the drain bottle is emptied
" P. 13 "Disposing of Discharged Fluid"
• Switch the sub power on once every two weeks.
Switch the sub power on once every two weeks. When you turn on the power, the machine automatically
performs operations such as those to keep the print heads from drying out. Leaving the machine unused for a
prolonged period may damage the print heads, so be sure to switch on the power to perform these automatic
operations.
• Keep the machine at a constant temperature and relative humidity.
Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a relative
humidity of 20 to 80% (with no condensation). Failure to do so may result in malfunction.
8
1.Introduction