Ipv6/Port Filter Screen - ZyXEL Communications LTE4506-M606 User Manual

Table 26 Router > Firewall > IPv4/Port Filter
L ABEL
Port
Protocol
Dest. IP
Port
Comment
Action
Apply
Reset
6.7 IPv6/ Po rt Filte r Sc re e n
The LTE4506 firewall is a packet filtering firewall and restricts access based on the source/destination
computer network address of a packet and the type of application. Use this screen to configure IP
filtering rules. To access this screen, click
Router > Firewall > IPv6/Port Filter
Fig ure 35
The following table describes the labels in this screen.
Table 27 Router > Firewall > IPv6/Port Filter
L ABEL
IPv6/Port Filter
Enable IPv6/Port
Filter
Chapter 6 Router
DESC RIPT IO N
This field displays a single port number of the source or a port range.
Enter the port number/range of the source that define the traffic type, for example TCP port 80
defines web traffic.
This field displays the protocol (
which you want to apply the rule.
This field displays the destination IPv4 addresses to which this rule applies.
This field displays a single port number of the destination or a port range.
Enter the port number/range of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Enter descriptions of the rule in this field.
Click to go to the screen where you can edit the filtering rule.
Edit
Click to remove the filtering rule.
De le te
Click this button to save your changes back to the LTE4506.
Click to reload the previous configuration for this screen.
Re se t
Ro ute r > Fire wa ll > IPv6/ Po rt Filte r
DESC RIPT IO N
Select the check box to enable the rule.
LTE4506 User's Guide
, , or ) used to transport the packets for
T C P UDP T C P+UDP a ny
55
.