Ipv6/Port Filter Screen - ZyXEL Communications WAH7706 User Manual

Table 26 Router > Firewall > IPv4/Port Filter
LABEL
Port
Comment
Action
Apply
Reset

6.7 IPv6/Port Filter Screen

The WAH7706 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. To access this screen, click Router > Firewall > IPv6/Port Filter.
Figure 31 Router > Firewall > IPv6/Port Filter
The following table describes the labels in this screen.
Table 27 Router > Firewall > IPv6/Port Filter
LABEL
IPv6/Port Filter
Enable IPv6/
Port Filter
IPv6/Port Filter List
Add New
Source IP
Chapter 6 Router
DESCRIPTION
This field displays a single port number of the destination or the starting port number of a
range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Enter descriptions of the rule in this field.
Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Click this button to save your changes back to the WAH7706.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Select the check box to enable the rule.
Click Add New to create a new rule.
This field displays the rule index number.
This field displays the source IP addresses to which this rule applies.
WAH7706 User's Guide
56