Status Register (Statr); Rndis Register (Rndisr); Status Register (Statr) Field Descriptions; Rndis Register (Rndisr) Field Descriptions - Texas Instruments TMS320DM357 User Manual

www.ti.com
4.2

Status Register (STATR)

The Status Register (STATR) is shown in
31
15
LEGEND: R = Read only; -n = value after reset
Bit Field Value
31-1 Reserved 0
0 DRVVBUS
0
1
4.3

RNDIS Register (RNDISR)

The RNDIS Register (RNDISR) is shown in
31
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field Value
31-20 Reserved 0
19 RX4EN 0-1
18 RX3EN 0-1
17 RX2EN 0-1
16 RX1EN 0-1
15-4 Reserved 0
3 TX4EN 0-1
2 TX3EN 0-1
1 TX2EN 0-1
0 TX1EN 0-1
SPRUGH3 – November 2008
Submit Documentation Feedback
Figure 17
Figure 17. Status Register (STATR)
Reserved
Reserved
R-0
Table 18. Status Register (STATR) Field Descriptions
Description
Reserved
Current DRVVBUS value.
DRVVBUS value is logic 0
DRVVBUS value is logic 1
Figure 18
Figure 18. RNDIS Register (RNDISR)
Reserved
R-0
Reserved
R-0
Table 19. RNDIS Register (RNDISR) Field Descriptions
Description
Reserved
Receive Endpoint 4 RNDIS mode enable.
Receive Endpoint 3 RNDIS mode enable.
Receive Endpoint 2 RNDIS mode enable.
Receive Endpoint 1 RNDIS mode enable.
Reserved
Transmit Endpoint 4 RNDIS mode enable.
Transmit Endpoint 3 RNDIS mode enable.
Transmit Endpoint 2 RNDIS mode enable.
Transmit Endpoint 1 RNDIS mode enable.
and described in Table
R-0
and described in Table
20
4
Universal Serial Bus (USB) Controller
Registers
18.
16
1 0
DRVVBUS
R-0
19.
19 18 17
RX4EN RX3EN RX2EN RX1EN
R/W-0 R/W-0 R/W-0 R/W-0
3 2 1
TX4EN TX3EN TX2EN TX1EN
R/W-0 R/W-0 R/W-0 R/W-0
16
0
83