Table of Contents
Advertisement
If you provide an email address, Agilent will promptly email your license key. Otherwise, you
will your receive your license key via postal mail.
Downloading the Online PNA Service Guide
To view the online Service Guide for your PNA model number, use the following steps:
1. Go to www.agilent.com.
2. In the Search box, enter the model number of the analyzer (Ex: N5230A) and click Search.
3. Click
Technical Support >
4. Click
Service
Manual.
5. Click the service guide title to load the PDF file.
6. When the PDF of the Service Guide is displayed, scroll through the Contents section
bookmarks to locate the information needed.
Protecting Your Workspace from Electrostatic Discharge
For information, click on the Chapter 1 PDF bookmark,
in the online Service Guide
ESD Equipment Required for the Installation
ESD grounding wrist strap
5-ft grounding cord for wrist strap
2 x 4 ft conductive table mat and 15-ft grounding wire
ESD heel strap (for use with conductive floors)
Tools Required for the Installation
T-10 TORX driver (set to 9 in-lbs)
T-20 TORX driver (set to 21 in-lbs)
5/16-inch torque wrench (set to 10 in-lbs)
1-inch torque wrench (set to 72 in-lbs)
1. See
"Downloading the Online PNA Service Guide" on page
Installation Note N5230-90010
Manuals.
1
.
Description
Description
"Electrostatic Discharge Protection"
Agilent Part Number
9300-1367
9300-0980
9300-0797
9300-1308
Agilent Part Number
5.
N/A
N/A
N/A
N/A
5
Advertisement
Table of Contents
