Agilent Technologies N5230AU/CU-971 Installation Note page 17

Step 6. Remove the 20 GHz Top to Bottom Cables
1. Disconnect cables W3 and W6 at the locations shown in
2. Place the analyzer on its side as shown in
3. Disconnect cables W3 and W6 at the locations shown in
the direction indicated. It may be necessary to guide the other end of the cables, on the
bottom side of the analyzer, as they are being removed.
Figure 9 20 GHz Top to Bottom Cables Removal, Bottom
Installation Note N5230-90010
Figure
Figure 10.
Figure 10
9.
and remove the cables in
17