Agilent Technologies N5230AU/CU-971 Installation Note page 6

Equipment Required for Post-Upgrade Adjustments
Equipment Type
Power meter
Power sensor, 2.4 mm
Adapter, 2.4 mm (f) to 2.4 mm (f)
RF cable, 2.4 mm (f) to 2.4 mm (f)
About Installing the Upgrade
Products affected. . . . . . . . . . . . . . . . . . . . . . . . . . N5230A/C Option 220 (20 GHz, 2-port,
Installation to be performed by . . . . . . . . . . . . . . Agilent service center or personnel
Estimated installation time . . . . . . . . . . . . . . . . . 2.0 hours
Estimated adjustment time . . . . . . . . . . . . . . . . . 0.5 hours
Estimated full instrument calibration time . . . . 4.5 hours
6
Model or
Part Number
E4418B/E4419B
8487A
11900B
85133C
standard test set)
qualified by Agilent
Installation Note N5230-90010
Alternate Model or
Part Number
E4418A/E4419A
None
85056-60007
85133E