FABIA 2000
Body Work
58-2
Rear door (Praktik)
Rear door Summary of components
Note
♦
The door at the rear on the left must not be opened in
some countries due to legal requirements (the lock re-
mains permanently in the locked position).
♦
The door trim panel will be destroyed if the locked
door at the rear on the left is opened.
1 - Fixed window pane
removing:
Removing cover ⇒ item 12.
–
Remove the outer ⇒ item 2
–
channel seal.
Remove the inner ⇒ item 6
–
channel seal.
Release screw ⇒ item 5.
–
–
Remove the window pane.
Installing:
Installation is carried out in the
reverse order.
2 - Outside channel seal
3 - Door
removing and installing
⇒ Chapter 58-1
4 - Inside window run
5 - 3.5 Nm
6 - Inside channel seal
7 - Engine-gearbox assembly
carrier
removing:
–
Remove door trim panel
⇒ Chapter 70-2.
–
Unclip securing rod.
Release screws ⇒ item 8.
–
–
Remove the assembly carri-
er.
Installing:
Installation is carried out in the
reverse order.
8 - 8 Nm
9 - 8 Nm
10 - Holding bracket for the cover
11 - Fit retainer
12 - Cover
removing:
Remove assembly carrier ⇒ item 7.
–
Release screw ⇒ item 9.
–
Remove the holding bracket ⇒ item 10 with stop ⇒ item 11 and let the cover lower downwards.
–
–
Remove the cover.
Edition 02.02
S00.5319.09.20
Rear door (Praktik)
58
58-2
1
page