FABIA 2000
Body Work
–
Draw clip -1- in the plate opening and allow to clip into
door handle -2-.
Note
During assembly keep the door handle -2- pressed
against the door panel.
Installing the lock cylinder housing ⇒ 57-1 page 5.
Note
Perform a functional check because the door cannot be
opened if the adjustment is not accurate and the Bowden
wire is not clipped on correctly.
Removing and installing the door lock
The door lock can only be removed together with the as-
sembly carrier.
Removing
Removing the lock cylinder housing ⇒ 57-1 page 5.
–
–
Unclip clip -1- from the door handle -2-.
Remove assembly carrier ⇒ 57-1 page 2.
–
–
Separate boot -1- from pillar A and disconnect the
electrical plug connections located behind it.
Edition 01.05
S00.5319.15.20
Front door
57
57-1
7
page