FABIA 2000
Body Work
–
Release the bottom catch pegs of the trim strip with
screwdriver in -direction of arrow A-.
–
Release the top catch pegs of the trim strip with
screwdriver in -direction of arrow B- and remove.
–
Release the catch pegs -arrows- of the grid with
screwdriver in -direction of arrow A- und remove grid
from radiator grill frame.
Installing
Installation is carried out in the reverse order. Pay atten-
tion to the following.
Note
The individual parts of the radiator grill must be locked
into one another. Rivet on shield to radiator grill (rivet with
4x10 mm - use drift).
Adjusting front bonnet
–
The tailgate can be adjusted by means of the oval
holes on the hinge.
–
The height of the bonnet relatively to the wings can be
adjusted with the adjusting buffers ⇒ item 5 in 55-1
page 1.
–
After carrying out removal and installation or adjust-
ment work, perform corrosion protection measures at
the screws and hinge.
Edition 10.03
S00.5319.13.20
Front bonnet
55
55-1
3
page