Installation - TANDBERG F1 D13353.02 User Manual

2 Installation

Precautions:
 Never install communication wiring during a lightning storm.
 Never install jacks for communication cables in wet locations unless the jack is
specifically designed for wet locations.
 Never touch uninstalled communication wires or terminals unless the telephone line
has been disconnected at the network interface.
 Use caution when installing or modifying communication lines.
 Avoid using communication equipment (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock from lightning.
 Do not use the communication equipment to report a gas leak in the vicinity of the
leak.
 Always connect the product to an earthed socket outlet.
 The socket outlet shall be installed near to the equipment and shall be easily
accessible.
 Never install cables without first switching the power OFF.
 1TR6 network type is not approved for connection directly to the telecommunications
network. This network type is only to be used behind a PABX.
 X.21 network type is not approved for connection directly to the telecommunications
network. This network type is only to be used together with already approved
equipment, and is not meant for direct connections to the telecommunication
networks.
 V.35/RS-449/RS-366 network type is not approved for connection directly to the
telecommunications network. This network type is only to be used together with
already approved equipment, and is not intended for direct connection to the
telecommunication networks.
 This product complies with directives: LVD 73/23/EC, EMC 89/366/EEC, R&TTE
99/5/EEC
13