Interfaces - TANDBERG F1 D13353.02 User Manual

5.1 Interfaces

5 Video Inputs:
 2 video inputs supporting S-Video through Mini-DIN connectors.
 2 video inputs supporting composite signals through RCA connectors.
 1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) input
supporting resolutions SVGA (800x600), XGA (1024x768) and SXGA (1280x1024),
analog or digital.
 (use VNC as a 6th video input).
The standard camera uses one of the S-Video inputs. The system will automatically adapt to
a PAL or NTSC input.
6 Video Outputs:
 2 S-Video outputs, Mini-DIN connectors.
 2 composite video outputs, RCA connectors.
 2 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) output
supporting resolutions SVGA (800x600) and XGA (1024x768, analog or digital.
The first Mini-DIN connector and the first RCA connector provide main video
(incoming/outgoing video and menus). The two other connectors provide
selfview/snapshot/Duo Video. The S-Video outputs are used by default by the monitors. The
outputs are always active. The format of the output will be either PAL or NTSC depending on
your country's standard video format.
VGA formats supported on 'DVI-I out':
SVGA (800x600) 75 Hz
XGA (1024x768) 60 Hz
6 Audio Inputs:
 3 microphone inputs (balanced, 24V phantom powered) via XLR connectors.
 3 audio inputs (line level) via RCA connectors.
All audio inputs are active by default. For further information, refer to chapter
3 Audio Outputs:
 1 output (line level) via RCA connector providing audio from far end, in addition to dial
tones. This output also supports S/PDIF. S/PDIF is used by the Digital Natural Audio
module.
5 Peripheral Equipment
4.5 Audio.
121