TANDBERG F1 D13353.02 User Manual page 16

TANDBERG 8000 MXP
point towards the system. The system will automatically equalize sound levels. Loud and soft
voices are picked up and transmitted to the far end at approximately the same level.
Digital Natural Audio Module
The Digital Natural Audio Module (DNAM) is designed to enhance audio quality during a
videoconference. The DNAM provides natural sounding audio - as if the person, or another
sound source, in conference is present in the same room as you.
The DNAM is a frequency-compensated sound system optimized for voice and other sounds
that appears in modern videoconferencing. It is designed and dedicated specifically for
videoconferencing requirements. Use of the highest quality speaker elements as well as
proper amplifier- and software techniques minimizes signal distortion.
The DNAM amplifier is mounted in the bottom of the speaker cabinet.
TANDBERG Tracker
The Tracker is a small infrared remote control device
made to steer the camera to any desired location within
the room. Typically, several trackers would be used with
each system.
Each Tracker has two buttons:
 One Single person button to point the camera at
a specific person/location.
 One Group button to point the camera at all
participants.
Beneath the battery in the Tracker, there is a switch,
which can be set to 16 different positions between 0 and
F. For camera preset 10 to 15, the numbers A to F
should be selected.
For more information, contact your local TANDBERG
representative.
10